Wireless Family Thermal Heat Alarm

The CAVIUS Wireless Alarm Family is the latest addition to the CAVIUS range. Using innovative and automated Radio Frequency technology, our Wireless Family alarms connect with each other offering extra protection for your home and family.

The CAVIUS Wireless Family Thermal Heat Alarm has been designed to be installed in areas where smoke alarms cannot. These areas are the kitchen, garage, workshop and laundry. The Thermal Heat alarm detects a rapid and constant change in heat, normally caused by flaming or flash fires. A heat alarm should not replace smoke alarms – for all other areas either the battery-operated Wireless Family Smoke Alarm or Wireless Family Mains Powered Smoke Alarm is recommended.

Wireless Family Thermal Heat AlarmWireless Thermal Heat Alarm

A thermal heat alarm should be one of the most essential additions in your home. Over 34% of residential fires start in areas you are unable to install smoke alarms, this is due to either airborne cooking fats in the kitchen or car flumes in the garage blocking any smoke alarm and preventing smoke from entering the sensing chamber.

The CAVIUS Wireless Family Thermal Heat Alarm uses Radio Frequency technology to sync with other Wireless Family alarms in the house. This means when one of the alarms is activated, all other connected Wireless Family alarms will sound an alarm too. Everyone in your home, whether they’re upstairs, downstairs, or even in a separate wing of the house, will know immediately if there is a potential fire developing somewhere in the home. Keep everyone in the house accounted for and out of the house faster in the case of a fire.

CAVIUS Wireless Family Interconnecting Alarms

The CAVIUS Wireless Thermal Heat Alarm comes with a 5 year long-life Duracell or Panasonic battery and is replaceable. The process for syncing up your Wireless Family alarms is simple and only takes 2 minutes; set all your Wireless Family alarms into ‘LEARN/LINK’ mode, press the test button on one alarm which creates a ‘Master’ – the ‘Master’ sends out a unique code to all your other alarms. When the other alarms have learnt this code, place them back into ‘NORMAL’ mode and you are ready to install.

Once installed with the simple ‘smart-clip’ ceiling mechanism, the alarm is activated. It has an audio alert output of 85 dB(A) at 3 metres, generating a piercing alarm designed to wake you from your sleep. The Wireless Thermal Heat Alarm also syncs with the Wireless Family Photoelectric Smoke Alarm and the Mains Powered Smoke Alarm.

CAVIUS devices have a 30 day low battery warning, increasing your chances of identifying that your smoke alarms need to be replaced.

The intelligent test and 10 minute hush button is embedded in the bottom surface of the alarm for easy access. A dim, low light flash will be emitted from the device to let you know the device is operating.

Aesthetically pleasing CAVIUS alarms suit any new home, refurbishment and areas of your home like the kitchen, garage or laundry where you want your alarm to be almost invisible.



5 Year long-life Duracell or Panasonic battery (replaceable)
New Radio Frequency technology with the ability to connect up to 32 Wireless alarms
A penetrating sound at 85 dB(A) at 3 metres
An easy and wide 10 minute hush and test button
30-day low battery alert
Easy installation with the unique smart-clip ceiling mechanism
EN60065 certified
Also connects with CAVIUS Wireless Family Smoke Alarm and Mains Powered Smoke Alarms

Technical specifications:

Functional Temperature Range: -10ºC to +38ºC
Interconnected Radio Frequency: 926.365 MHz
Maximum Humidity: Up to 95% Rh non-condensing
Battery: Duracell or Panasonic Lithium CR123A, 3V 1600mAh
Ceiling Installation